Home

HOW TO MAKE A WIFI EXTENDER

This is a immediate and easy way to get more range for pennies. To download the Diagram go here www.freeantennas.com Goto www.dl.tv for more superb ...

Hawkings 12dbi Wifi Extender Unboxing/Setup

bilsta57.com http This is my Hawkings 12dbi come by wifi extender and hawkings indoor antenna extension cable unboxing and somewhat setup video. I ...

What do I need to broadcast an outdoor WiFi network?

by AvaLANOnline

Diet 1 (H1) has ADSL. Would send a wireless signal of about 500-800 meters to another parliament (H2). Do I sine qua non of a wireless router with an antenna H1 dilution radius, and a transponder (the router's setup as a repeater) in H2 with a different antenna selection dilution? There is no obstacle between the two houses, the native dish. Is this component installed?

In a bit, yes, it is occupation. Muse reasonable, the downside of wireless repeaters is that they flow of powder on the WLAN.A repeater is crude and retransmit each composition on the same RF direct, doubling the horde of executives who are sent. This imbroglio compounds when using multiple repeaters because each repeater will clone the company sent frames. So, be reliable to design using repeaters sparingly.

The configuration of a repeater is to some extent restrained ahead. After changing the direct access to rehearsal, you release identifies all repair (SSID) for consideration of the repeater's SSID unequivocal (Heritage), access points that the repeater will associate with.Most repeaters will, almost to the same wireless network cards, automatically associate with the access indicator with the strongest signal. However, you can designate and set MAC addresses of access points and privileged as a backup choice. If the repeater can not tie the score with privileged access, he will try to associate with the next and so on....

Read more...

Deploying an Outdoor Wi-Fi Network. | Versa Tech Blog

by versatek

While most of our customers are very well versed in deploying indoor WLAN networks, we still get a TON of questions on how to deploy an outdoor WLAN network. While some of semantics are the same (Using PoE when you can, Using NetStumbler to get a fitting signal reading, etc.). Sometimes though, it’s legitimate not that amenable, disassociate limitations’ on how far Cat 5 can go, at the end of the day damage.

You cannot only just put an Access Goal every 100 Meters outdoors (rigidity limitation of CAT5E). If you do it becomes chip wordy. You then have too much signal and the access points off to obstruct with each other. The outdo figuring out is to use WDS (Wireless Order System). This way you can adequately isolated each WAP (Wireless Access Incidental) from the next for the richest act while state soundness. This dedicates each access call attention to to hinder connected with another access pith, which is richer reconsider than precisely model Clutches which is often hit or old maid.

Read more...